Status
Delivery status to the endpoint(s) configured on the hub’s hub group.
In Progress (Blue Sync Icon): The measurement is currently being delivered.No Status (Grey Cloud Icon): The measurement was taken with a hub belonging to a hub group that has no endpoints configured, so the measurement was not delivered anywhere.Succeeded (Green Checkmark Icon): The measurement was successfully delivered to all endpoints of the hub’s hub group.Failed (Red X Icon): The measurement was not successfully delivered to at least one endpoint.<aside>
💡 If the hub’s hub group has more than one endpoint and, during measurement delivery, at least one of the requests to an endpoint failed, then the measurement will show the Failed status, even if the other requests succeeded.
</aside>
Time
The time at which the measurement was taken. The time is reported by two different sources and chosen based on the following hierarchy:
<aside> 💡 This multi-sourced decision is made because the time that the hub sends the measurement may not be the same as the time the device reports, i.e. if the device was out of range of the hub when a measurement was taken and sent by the hub after a certain amount of time once returned in range.
</aside>
Type
The type of measurement.
MAC Address
The full MAC address of the medical device.
Hub ID
The first 10 characters of the hub ID.
Transmitting Hub ID
The first 10 characters of the ID of the hub that transmitted the measurement. In most cases, this will be the same as the Hub ID.
<aside> 💡 In situations where the device used for the measurement is bound to a hub but picked up and transmitted by another hub, then the Hub ID column will display the bound hub’s ID while the Transmitting Hub ID column will show the transmitting hub’s ID.
</aside>
Measure Value
A JSON representation of the measurement values transmitted by the hub.
Device Make
The make of the device, i.e. the name of the company that produces the device.
Device Model
The model name of the device.